AIR CONDITIONING
FINNED TUBE HEAT EXCHANGERS
 
 
FINNED TUBE HEAT EXCHANGERS

AirFrige finned coils are the result of the most advanced North American engineering know-how combined with an accumulation of practical experience in manufacturing techniques.

AirFrige finned coils can be installed in any heating, cooling, heat recovery and heat pump application and are offered in a most complete range of tubes and fins. The medium can be hot water, brine mixtures, evaporating and condensing refrigerant.

  • PRIMARY SURFACE is round seamless 3/8", " or 5/8" o.d. copper tube, staggered in the direction of air flow.
  • SECONDARY SURFACE consists of corrugated aluminum or copper plate fins.
  • FIN SPACING is available at 4,2 - 3,2 - 2,5 - 2,1 - 1,8 mm
  • CASING is constructed of galvanized steel or aluminum.
  • HEADERS are of seamless copper tubing.
  • TESTING PRESSURE of water and evaporator coils set at 22 bar ; condenser coils are tested at 30 bar.
  • COATING of the aluminum fins with epoxy phenolic raisin can be offered for prevention of aluminum oxides appearing on the metal surface.
  • FIN HEIGHT from 305 mm to 1372 mm.
  • FINNED LENGTH from 305 mm to 3580 mm.